Advertisement
Available languages
Available languages
Max. rated power
consumption
Connector
Protection
Operation/storage
temperature
Vibration/shock
immunity
Series connection to
DVP-PLC MPU
Functions Specifications
Digital/Analog module
Range of analog output
Range of digital
conversion
Max./Min. range of
digital data
Hardware Resolution
Max. output current
Tolerance load
impedance
Analog output channel
Output impedance
Overall accuracy
Response time
Digital data format
Isolation method
Control Register
CR#
Attrib.
#0
O
R
Model name
#1
O
R
Firmware version
#2
O R/W CH1 output mode setting
Digital/Analog module (02D/A & 04D/A)
02DA: 1.5W, 04DA: 3W, supply by external power source.
European standard removable terminal block (Pin pitch: 5mm)
Voltage output is protected by short circuit. Short circuit lasting for
too long may cause damage on internal circuits. Current output can
be open circuit.
Operation: 0°C~55°C (temperature), 5~95% (humidity), Pollution
degree2
Storage: -25°C~70°C (temperature), 5~95% (humidity)
International standards: IEC61131-2, IEC 68-2-6 (TEST Fc)/
IEC61131-2 & IEC 68-2-27 (TEST Ea)
The modules are numbered from 0 to 7 automatically by their
distance from MPU. Max. 8 modules are allowed to connect to MPU
and will not occupy any digital I/O points.
Voltage output
-10V ~ 10V
-32,000 ~ +32,000
-32,768 ~ +32,767
14 bits
5mA
1KΩ ~ 2MΩ
2 channels or 4 channels / each module
0.5Ω or lower
0.5% when in full scale (25°C, 77°F)
1% when in full scale within the range of 0 ~ 55°C (32 ~ 131°F)
400μs / each channel
2's complement of 16 bits
Optical coupler isolation between analog circuits and digital circuits.
No isolation among analog channels.
500VDC between digital circuits and Ground
500VDC between analog circuits and Ground
500VDC between analog circuits and digital circuits
500VDC between 24VDC and Ground
Register name
0 ~ 20mA
0 ~ +32,000
0 ~ +32,767
14 bits
Set up by the system, model code:
DVP02DA-E2 = H'0041; DVP04DA-E2 =
H'0081
Display the current firmware version in hex.
Output mode: Default = H'0000.
Take CH1 for example:
- 3 -
Current output
4mA ~ 20mA
0 ~ +32,000
-6,400 ~ +32,767
14 bits
－
0 ~ 500Ω
Explanation
Advertisement
