Editing The Contents Of An Md - Onkyo MD-105X Operating Instructions Manual

Editing the contents of an MD

Erasing a track
The following operation is possible when the
unit is stopped or paused.
1
Turn the AMCS knob until the
track number you want to erase
is displayed.
( PUSH TO ENTER
TRACK
1
DIGITAL IN
L
40 20 10
R
2
Press the EDIT/NO button several
times until "Erase?" appears in
the display.
EDIT/NO
TRACK
DIGITAL IN 1
L
40 20 10
R
To stop erasing a track
Press the EDIT/NO button until "Erase?"
disappears, or press the e button.
AMCS
)
1 2 3 4 5
6 7 8 9 10
6 2 0
11 12 13 14 15
1 2 3 4 5
6 7 8 9 10
6 2 0
11 12 13 14 15
3
Press the YES button.
The selected track is erased. When the
erasing of the track is completed,
"Complete" appears in the display.
1
DIGITAL IN
L
40
TOC
R
• When a track is erased, the tracks
following that track are advanced, each
given a new number which is smaller by
one track than the previous track
number. For example, if you erase track
15
2, track 3 will now be renumbered as
track 2; track 4 will now be renumbered
as track 3, and so on.
Note
While the TOC indicator is lit or flashing, do not
move or unplug the MD recorder.
To erase all tracks of an MD
1 Press the e button.
2 Press the EDIT/NO button several times
until "All Erase?" appears in the
15
display.
To cancel, press the EDIT/NO button or
press the STOP button.
3 Press the YES button. "All Erase??" is
displayed for confirmation.
On the display, the music calendar
flashes.
4 Press the YES button again.
When the erasing of all tracks of the
MD is completed, "Complete"
appears in the display.
Note
While the TOC indicator is lit or flashing, do not
move or unplug the MD recorder.
YES
1 2
6 7
20 10 6 2 0
11 12 13 14 15
3 4 5
8 9 10
15
37