Connections; Connecting To The Onkyo Separate Collection Series Components; Connecting To The Other Components - Onkyo MD-105X Operating Instructions Manual

Connections

Connecting to the Onkyo Separate Collection series components

This section introduces you to the other Separate Collection Series system components and their
convenient system functions, followed by connecting instructions.
The following Separate Collection series components are commercially available:
• T-405X ........ Stereo Tuner
• A-905X ....... Integrated Stereo Amplifier
• K-505X ....... Stereo Cassette Tape Deck
• C-705X ....... Compact Disc (CD) Player (Not available in U.S.A and Canada)
• C-707CH .... Compact Disc (CD) Changer (Only available in U.S.A. and Canada)
Note that the available components may vary according to the area.
Combination use of the unit with the above system components enables you to operate the
following convenient functions.
• Auto Power On
– You can turn on the power to the amplifier by pressing the STANDBY/ON button on one of the
system components.(The amplifier's POWER switch must be set to ON.)
– When the amplifier's POWER switch is set to ON, you can turn on the power to all the system
components simultaneously by pressing the STANDBY/ON button the amplifier.
Afterwards, you can turn off the power to the individual components that are not in use.
• Direct Change
Pressing the n button of the MD-105X automatically selects the "MD" input source on the
A-905X before playing the MD.
• Remote control of the System Components
You can control the operation of this MD recorder using the A-905X's remote controller.
• Program Timer
You can record the desired broadcasting programs or play your favorite MD at a specified time
using the T-405X's built-in timer. (Refer to the T-405X instruction manual for details.)
• Sleep Timer
You can fall asleep to a music/radio program with the timer. (Refer to the T-405X instruction
manual for details.)
• CD-dubbing
You can start recording from a CD player to your MD-105X by pressing the CD DUBBING button.
• CD-synchro Recording
When this function is enabled, you can immediately start recording to the MD by pressing the
s button on the CD player. (Refer to page 32 for details.)
• Cassette-synchro Recording
When this function is enabled, you can start recording to the MD by pressing the s button on
the cassette deck. (Refer to page 33 for details.)
10