Other Information Message List - Onkyo MD-105X Operating Instructions Manual

Other Information
Message list
The following table explains the various messages that appear in the display.
Message Meaning
Blank Disc
Cannot Copy An attempt was made to make a second copy from a digitally dubbed MD (see "Rules for Digital
Cannot Edit
Cannot Rec
D. In Unlock
Disc Error
Disc Full
Impossible The disc could not be edited.
Mecha Error
Memory Full
Name Full
No Change
No Disc
No Track
Not Audio
Over
Protected
Retry Error
Temp Over
U-TOC Error
TOC Writing
Full
46
A new recordable MD or a recordable MD without disc or track names is inserted.
Recording" on page 48).
An attempt was made to edit the disc during MEMORY or RANDOM play or in recording standby
mode, or an attempt to edit a premastered disc was made.
An attempt was made to record onto a premastered (read-only) disc.
The digital equipment (CD player, DAT, etc.) has not been connected properly. Otherwise, the
connected digital equipment is not operating properly.
The disc is abnormal (scratched or missing a TOC).
The disc is full (see "System Limitations" on the next page).
An error occurred in the unit's internal mechanism.
An attempt was made to record a 26th track.
Number of caracters has reached the limit for input to one MD.
The naming attempt failed.
There is no disc in the unit.
The inserted disc has a disc title but no tracks.
An attempt was made to play a non-audio disc.
In pause mode (when playing is paused), the f (Fast Forward) button was pressed to the end
of the disc.
The inserted disc is record-protected.
The recording attempt failed due to a consecutive disturbance or scratches on the MD.
An abnormally high temperature is detected in the unit's internal mechanism.
The writing of the recorded or edited contents Failed.
The unit is writing the recorded or edited contents to the MD.
An attempt was made to enter a character over the maximum character capacity while naming.