Onkyo MD-105X Operating Instructions Manual page 13

Connecting to the other components (continued)
Connecting the (z) controller
If you are using other ONKYO components equipped with z connectors, you can control these
components using the amplifier's remote cnotroller.
Before connecting
• The amplifier must be connected in the z system hookups for z control operation.
• Each component has two z connentors. There is no differents between those connectors.
• The components may be connected in any order.
• Remote control operation is not possible if only the z remote control cable is connected to the
z connectors.Connect the audio connection cables correctly.
Tuner
Amplifier
MD-105X
CD player
Connecting the AC power cord (mains lead)
Insert the AC power cord into a wall outlet. The STANDBY indicator lights.
• To use the unit with the other Onkyo Separate Collection series components, follow the
connection diagram in the A-905X instruction manual to connect the unit to the system.
• If you press the EJECT button whil the unit is in the STANDBY mode, the power will turn on and
the display will light up automatically.
z cable
STANDBY/ON
STANDBY
13