Signal Synchro Recording - Onkyo MD-105X Operating Instructions Manual

Signal Synchro recording

Even if your recording source is not Onkyo z-compatible, you can perform synchronized recording.
1
Use the INPUT selector to select
MO, ST, D1, or D2, according to
the connected device.
• You can perform signal synchro
recording with both digital and analog
recording sources.
MO ST D1 D2
ANALOG
DIGITAL IN 1
L
40 20 10 6
R
2
Press the REC button twice to
display "Signal Rec."
"Signal Rec" appears, then the unit
enters the Signal Wait mode.
Note
If no signal is input for approx .30 seconds, the MD
recorder will enter recording standby mode.
MINDISC RECODER
DISC LOADING MECHANISM0
STANDBY/ON
CD
DUBBING
STANDBY
INPUT
MO ST D1 D2
ANALOG
INPUT
1 2 3 4 5
6 7 8 9 10
2 0
11 12 13 14 15 15
REC
AMCS
（PUSH TO ENTER）
REC
oREC
DISPLAY EDIT/NO YES
MD- 105 X
3
Recording starts.
Recording starts as soon as the unit
receives signals from the recording source
while "Signal Wait" is displayed.
(Recording source)
s
Note
Signal synchro recording is performed with Level
Sync automatically set to On.
(Continued to the next page)
31