Editing The Contents Of An Md - Onkyo MD-185X Instruction Manual

Editing the contents of an MD

You cannot edit the contents of premastered MDs.
Moreover, you cannot edit the MD when its record-protect hole is open
("Protected" is displayed).
Before starting the editing procedure, close the hole (see page 23).
1
2
3
24
AMCS
(PUSH-ENTER)
Track number
TRACK
1
DIGITAL IN
L
40 20 10 6 2 0
R
EDIT/NO
TRACK
1
DIGITAL IN
L
40 20 10 6 2 0
R
YES
DIGITAL IN 1
L
40 20 10 6 2 0
TOC
R
Lights when completed.
STAND-BY/ON
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15 15
Flashes
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15 15
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15 15
MINIDISC RECORDER
20bit PROCESSING
DISPLAY INPUT
MIN
PLAY MODE REPEAT EDIT/NO
2 OPTICAL DIGITAL INPUTS
SAMPLING RATE CONVERTER
DISC LOADING MECHANISM
(PUSH-ENTER)
CD DUBBING REC
STAND BY -
2
Erasing a track
The following operation is possible when
the unit is stopped or paused.
1. Turn the AMCS knob until the track
number you want to erase is dis-
played.
2. Press the EDIT/NO button several
times until "Erase?" appears in the
display.
• To stop erasing a track...
Press the EDIT/NO button again, or
press the button.
ß
3. Press the YES button.
The selected track is erased. When the
erasing of the track is completed,
"Complete" appears in the display.
• When a track is erased, the tracks
following that track are advanced, each
given a new number which is smaller
by one track than the previous track
number. For example, if you erase track
2, track 3 will now be renumbered as
track 2; track 4 will now be renumbered
as track 3, and so on.
Note:
While the TOC indicator is lit or flashing,
do not move or unplug the MD recorder.
To erase all tracks of an MD...
1) Press the button.
ß
2) Press the EDIT/NO button several
times until "All Erase?" appears in the
display.
To cancel, press the EDIT/NO button
or press the ß button.
3) Press the YES button. "All Erase??" is
displayed for confirmation.
On the display, the track number
flashes.
4) Press the YES button again.
When the erasing of all tracks of the
MD is completed, "Complete" appears
in the display.
Note:
While the TOC indicator is lit or flashing,
do not move or unplug the MD recorder.
REC LEVEL
MAX
YES
AMCS
MD- 185X
1 3