Usb - Kontron COM Express Eval 10 User Manual

5.8

USB

The COM Express® module's USB ports 0 to 3 are available on rear panel connector J7. USB port 5 is used on Express
Card connector. The COM Express® Eval Type 10 provides USB port 4 and 6 on RJ45/USB Combo connector J61.
Additionally USB7 is available on USB mini-A connector J3 as non-powered connector for USB client functionality.
Check the documentation of your module if USB client on Port #7 is supported and J3 can be used. J58 allows
connecting USB Client Power to GPI0 to use it as detection input for custom USB Client driver software.
USB Client connectorJ3 - Pin
1
2
3
4
5
6-9
27
COM Express® Eval Type 10 / Connectors and Features
J3 Function
USB Client Power detect
USB7-
USB7+
n.c.
GND
Shield GND