Time; Delete Data; Reset Settings; How To Use The Computer Interface - Omron INTELLI 637IT Instruction Manual

Time

You can change the time and date setting of your blood pressure monitor.
When reaching the time screen you will see the Gregorian calendar. The
year will be flashing.
1. By using the ( ) buttons you can set the current year.
2. By pushing the SET button you will lock the year and proceed
to the next setting.
For setting the month, date and time repeat step 1 and 2. After setting
the minutes you will proceed to the DELETE DATA screen.

Delete data

In this screen you are able to delete all stored measurement from you
OMRON 637IT. Please be careful that deleted data cannot be restored.
The factory preset is NO. If you choose YES the monitor will ask for a
confirmation "ARE YOU SURE?". To cancel select NO to confirm
DELETE DATA select YES.
After deleting all stored measurements the "Data Deleted Screen" will be
shown. All the stored measurements are deleted and the monitor will be
turned off.
If the stored measurements are not deleted you will proceed to the
RESET SETTINGS screen.

Reset settings

In this menu you can choose to reset all the settings to the "factory pre-
set" settings. The factory preset for this menu is NO. If you choose YES
by using the ( ) button the monitor will ask you for a confirmation "ARE
YOU SURE?" After confirmation by selecting YES all the settings will be
changed to the factory mode.
The monitor will return to the AUTO MEMORY SCREEN. You can turn off
your monitor by pushing the O/I button.
16

How to use the computer interface

This blood pressure monitor has a computer interface and is supplied with software to transfer the
memory of the blood pressure monitor to your personal computer.
Required operating environment
Time Screen The following operating environment is required to operate the communication software as supplied
on the CD-ROM.
Personal computer
OS
Memory (RAM)
Hard disk
Display
All Memory Erasure
Disk drive
YES Screen
Connection port
How to install the software
1) Turn on your personal computer
2) Insert the CD-ROM in the disk drive
3) Open the control panel
Are You Sure YES
Screen
4) Open the "Add/Remove Programs" by double clicking the icon
5) Execute the installation
Data Deleted (Blank)
Screen
How to uninstall the software
1) Open the control panel
Reset Settings YES
2) Open the "Add/Remove Prograns" icon by double clicking
Screen
3) Delete the application
Are You Sure YES Screen
: PC/AT compatible with CPU of 80486 or above or with
any Pentium processor.
: Windows 98SE/ME/XP/2000
: 16 MB or more
: Free area of 10 MB or more is necessary
: 640 x 480 pixels or more
: CD-ROM drive
: Free USB connection port
......Your windows desktop is displayed
• Click the "Start" button.
• Point the mouse pointer to "Settings" on the menu.
• Click "Control Panel"
• Click the "install button"
• Follow the instructions
• The software is installed on your personal computer
• Click the "Start" button
• Choose "Settings"
• Click "Control Panel"
• Click "BPFile" from the list
• Click the Add/Remove button
• .....The confirmation screen is displayed
• Click "Yes"
• ....."BPFile" is deleted
• Click "OK"
17