Table of Contents
Advertisement
• If you push the SETTING button while the power is turned off,
the Setting Screen is displayed in the order shown in the picture.
• You can select the setting or set the date and time with the
buttons.
• To finish the setting, push the ON/OFF button.
Position Sensor Setting
Automatic Memory Setting
(Refer to Page 15.)
(Refer to Page 14.)
All Memory Erasure
Reset Settings
(Refer to Page 16.)
(Refer to Page 16.)
Auto memory
You can either enable (ON) or disable (OFF) the memory function of your
blood pressure. When the auto memory function is switched off the measure-
ment will not be stored. When using your OMRON 637IT monitor with more
than one person it is recommended to disable the auto memory function. The
auto memory function mode is ON when you purchased your OMRON 637IT
(factory preset).
14
Measuring (Wrist) Setting
(Refer to Page 15.)
Alarm Setting
(Refer to Page 15.)
Time Setting
(Refer to Page 16.)
Automatic Memory
Screen
Automatic Memory
OFF Screen
Position sensor
The position sensor of your OMRON 637IT can be switched ON or OFF. In
the factory preset the position sensor is enabled. If the position sensor is
switched ON you can choose to have the optimal wrist height supported by
an acoustic sound (SIGNAL ON or OFF).
Position Sensor Screen
Position Sensor OFF
Screen
Left or right wrist measurement
Normally blood pressure is measured on the left wrist (factory preset). With your OMRON 637IT you
can choose to use the monitor either on your left or right wrist. It is recommended to use the same
wrist when for optimal comparisons of your blood pressure fluctuations.
Measuring (Wrist) Screen
Alarm
Your blood pressure monitor has the possibility to set an alarm twice a day. The alarm function can
be used to monitor your blood pressure at the same time every day or as a reminder for pill intake.
The alarm will sound for 2 minutes. By pushing the O/I button the alarm will stop. The alarm will not
sound when the blood pressure monitor is used (e.g. for measuring or graph display) at the moment
the alarm is set.
You can set the requested hour by pushing (
ceed with the minutes. By pushing the (
proceed. Push either (
) to enable (
Alarm Screen
Position Sensor ON and
SIGNAL OFF Screen
Measuring (Wrist) Right Wrist Screen
) when flashing. Press SET to lock the hour and pro-
) you can set the minutes. Press SET to confirm and to
) or disable (
) the alarm. Press SET to lock the settings.
Screen of indicating that
the alarm is sounding
15
Advertisement
Table of Contents
