Maintenance - Worx WG284E Manual

Cordless hedge trimmer
Hide thumbs Also See for WG284E:
Table of Contents

Advertisement

Available languages

Available languages

No light is
illuminated.
Only one light is
flashing twice per
cycle.
Only one light is
flashing three times
per cycle.
Only one light is
flashing four times
per cycle.

MAINTENANCE

Remove the battery from Hedge trimmer
before carrying out any adjustment, servicing
or maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to
clean your power tool. Wipe clean with a dry cloth.
Always store your power tool in a dry place. Keep
the motor ventilation slots clean. Keep all working
controls free of dust.
12
Cordless Hedge Trimmer
At least one battery is not
fully installed or battery
may be defective.
At least one battery is
over discharged (please
refer to the battery charge
condition), please recharge
the two batteries at once
before use again or storage.
At least one battery is hot,
wait for them cool down
before start again.
The machine is over load.
Remove tool from cutting
area and try again.
EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wg284e.9

Table of Contents