CPI 1184 Series Assembly Manual page 10

CPI SATCOM & Antenna Technologies
CAUTION: During the assembly procedure, the sequence of instructions must be
followed. DO NOT TIGHTEN ANY HARDWARE UNTIL INSTRUCTED.
2.0 Assembly Overview
Existing Hardware
Positioner
Rotation
Bolt
90
STEP 1:
A). Remove azimuth rod from positioner
assembly.
B). Set azimuth rod and related hardware
aside.
Positioner Assembly
Azimuth Rod
STEP 2:
A). Loosen rotation bolt on top of
positioner.
B). Rotate the positioner so that the
canister plate is oriented as shown.
Canister
Plate
C). Lightly tighten rotation bolt.
10
4096-224
1.8M SERIES 1184