Feed Support - CPI 1184 Series Assembly Manual

CPI SATCOM & Antenna Technologies
Reflector ( FACING
Left Hand
Feed Rod
Right Hand
Feed Rod
FIGURE 2
Feed Rod
See Detail D

Feed Support

Tube
See Detail C
)
18
STEP 3:
A). Attach feed support to the bottom of
the reflector with ( items 3, 6, 7 ) and
(2) of ( item 5 ). See Detail C.
B). Connect the feed rods to the end of
the feed support with (items 4, 6, 7)
and (2) of ( item 5 ). See detail D
C). Tighten the 1 / 2" carriage bolts to
the reflector crossarms using the
required torque specs on page 6.
D). Tighten all feed assembly hardware
using the required torque specs
on page 6.
Bottom of Reflector
Equal
Distance
FIGURE 3
4096-224
1.8M SERIES 1184
Reflector
Support
Tube