Toshiba B-FP2D-GH30-QM-S Owner's Manual page 7

Table of Contents

Advertisement

Keep away from microwave devices.
Communication performance may deteriorate or a communication error may occur due to radio interference
emitted from the microwave device.
Since the Bluetooth and wireless LAN use the same radio frequency band, each radio wave may interfere with each
other when they are used at the same time, causing a deterioration of communication performance or a
disconnection of network. If there is any problem with connection, please stop using either Bluetooth or wireless
LAN.
Do not use the product on a metal table or near a metal object.
Communication performance may be deteriorated.
Module Name: MBH7BTZ42
Bluetooth version:
Frequency:
Maximum Transmit:
Power:
Receive Sensitivity:
Data Rates:
Communication
distance:
Certification (Module):
Antenna specification:
Peak Gain:
CAUTION!
To avoid injury, be careful not to catch or jam your fingers while opening or closing the cover.
Do not touch moving parts. To reduce the risk that fingers, jewelry, clothing, etc., be drawn into the moving
parts, turn off the power switch to stop movement.
Safety Summary
Personal safety in handling or maintaining the equipment is extremely important. Warnings and Cautions
necessary for safe handling are included in this manual. All warnings and cautions contained in this manual and
written inside or outside of the printer should be read and understood before handling or maintaining the
equipment.
Do not attempt to effect repairs to this equipment. If a fault occurs that cannot be rectified using the procedures
described in this manual, turn off the power, then contact your authorised Toshiba Tec representative for
assistance.
Safety Precautions
This Owner's Manual and the products (machines) which you have purchased contain indications which should be
observed in order to use the machines safely and prevent harm to yourself and others and damage to property.
The meanings of these indications and symbols are given below.
Read these indications and become familiar with their contents before reading this Owner's Manual.
6 1. Precautions
V2.1 + EDR
2.4000 to 2.4835 GHz
Class 2
+4dBm (Except antenna gain)
-87 dBm
1Mbps (Basic Rate)/2Mbps
(EDR 2Mbps)/3Mbps (EDR
3Mbps)
3m/360deg (For BA400
specification)
TELEC/FCC/IC/EN
Mono-pole antenna
-3.6dBi (2.4GHz)
Module Name: RS9113DB
Standard:
IEEE802.11 a / b / g / n
Frequency:
2412 MHz to 2484 MHz/4910
MHz to 5825 MHz
Spacing:
5 MHz (2.4GHz), 20 MHz (5GHz)
Channel:
US: 1 to 11, 36 to 48, 52 to 64,
100 to 116, 120 to 128, 132 to
140, 149 to 165
Europe: 1 to 13, 36 to 48, 52 to
64, 100 to 140
Antenna:
PCB Trace antenna (built-in
module) @2.0dBi
Communication
802.11b: 1, 2, 5.5, 11 Mbps
speed/Modulation:
802.11g: 6, 9, 12, 18, 24, 36, 48,
54 Mbps
802.11n: MCS0 to MCS7 with
and without Short GI
OFDM with BPSK, QPSK, 16-
QAM, and 64-QAM 802.11b with
CCK and DSSS
Receive sensitivity:
-97 dBm
Transmission output:
18 dBm

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

B-fp2d-gh50-qm-s

Table of Contents