How To Attach The Accessories; Belt Clip - Toshiba B-FP2D-GH30-QM-S Owner's Manual

10. How to Attach the Accessories

CAUTION!
Care should be taken not to drop the printer when securing it to your waist or slinging it over your shoulder.
For fixing the printer to your belt, its width should be 40 mm or less. Use of the other belts may cause the printer
to fall off.

Belt clip

When you want to use the printer on belt, first secure the supplied belt clip to the rear of the printer.
Secure the belt clip [1] to the printer back with two screws (M-3x8) [2].
1
Only use the supplied screws to secure the belt clip. Use of other screws may damage the inside of the printer.
Fasten the belt clip [1] to your belt [3].
2
[ 1 ]
[ 2 ]
[ 1 ]
[ 3 ]
10. How to Attach the Accessories 23