Lifepro READY, SET, PRO User Manual page 9

SECURE THE ASSEMBLED SEAT
7
TO THE BIKE FRAME
1. Locate the seat adjustment knob
insert (14).
2. Loosen the knob (but do not remove it) by turning it counter-clockwise.
3. Pull the knob head out and slide the seat post
insert (14). A "click" indicates that the seat post is locked into position.
4. Tighten the knob to secure the seat post by turning it clockwise.
NOTE: Adjust the seat to your desired height after the bike is fully
assembled. See
ADJUST THE SEAT HEIGHT
16 VeloCycle User Manual Lifepro
(15) on the back of the seat post
(13) into the seat post
on page 22 for instructions.
13
14
15
INSTALL TWO AA BATTERIES
8
IN THE CONSOLE
1. Locate the two AA batteries (32)
2. Remove the battery compartment cover on the back of the
console (29).
3. Insert two AA batteries into the battery compartment according to the
polarity markings in the compartment.
4. Replace the battery compartment cover.
CAUTION: Never mix old batteries and new batteries. Only use AA
batteries with the console.
in the tool/accessory bag.
TOOLS & HARDWARE
Cover
(32) x2
32
29
Endurance Training Collection 17 Endurance Training Collection 17