Chase Mode - Botex Multi Pack MPX-405 User Manual

Operating Instructions:
This product has two different operating modes: Chase and Receive modes.
In Chase mode, this unit serves as a 4 channel chaser. In Receive mode, this
unit serves as a 4 channel DMX dimmer or MIDI pack. Please follow the
instructions to operate the unit in your desired mode.

Chase Mode:

This mode allows you to select any of 16 built-in programs, chase speed and
the light intensity for desired dramatic lighting.
Use the MODE to select Chase mode, the LED near Chase is lit indicating your
selection and the LED Display shows "P" followed by two numbers from 01-16.
Select your desired chase program
Once you have accessed Chase mode, press MENU to scroll to program menu.
The chase program is represented in the LED Display by "P" followed by two
numbers 01 -16. You can use the UP and DOWN Buttons to select any of the
built-in 16 programs to run at a single time.
Select your desired chase speed
This function allows you to change the program chase speed. While in Chase
mode, press and release MENU several times until "SP" followed by two numbers
01-99 is displayed in the LED Display. Then use UP and DOWN to select your
desired chase speed. A value 99 will give you the fastest chase speed. A value
01 represents the slowest chase speed.
Select your desired light intensity
This function allows you to change the light intensity. While in Chase mode,
press and release MENU several times until "d" followed by three numbers
000-100 is displayed in the LED Display. Then use UP and DOWN to change
the light output intensity. A value 000 represents zero output and value 100
represents full intensity.
Multi -Pak Instruction Manual Page 7