Table of Contents
Advertisement
Functions & Controls (Rear):
4
F6.3A 250V 5x20mm
1
POWER INPUT:AC 230V~50Hz, 16A max
1
1. Power Cord - Plug this cord into a matching wall power outlet.
2. DMX Input - This connector is used to receive DMX input signal
from a DMX controller.
3. DMX Output - This connector is used to send your DMX input signal
through to the next DMX device.
4. Channel Fuses - Each of the four channels is protected by a 6.3A fuse.
These fuses prevent you from overloading and damaging.
5. MIDI In - This connector is used to receive MIDI signal from a MIDI
controller or MIDI sequencer.
6. MIDI Thru - This connector is used to send the signal coming in from
the MIDI IN jack (5) to another MIDI device.
7. Link In - This connector accepts communication data from the preceding
unit. All the linked units will be controlled by the first unit.
Besides, this connect also can be used for the external infrared detector
(sold separately).
8. Link Out - This connector sends he communication data to the next unit.
5
6
MIDI
EX. SENSOR
4
IN
THRU
2
3
2
1
1=Ground
2=Data-
3
3=Data+
Multi-Pak Instruction Manual Page 5
7
8
LINK
IN
OUT
DMX IN
DMX OUT
2
3
Advertisement
Table of Contents
