Mounting Options - Botex Multi Pack MPX-405 User Manual

Mounting Options:

This unit has a sleek case design that makes it great for permanent or mobile
application. Moreover, the back plate can be used to be removed and reversed.
This function allows you to mount your unit to a tripod without the use of a clamp.
To reverse the back plate, please follow the below procedures:
Step 1: Use a screwdriver
to remove the four screws
that hold the back plate to
the unit.
Step 2:
Remove the Back
plate from the unit
Step 3:
Flip the back plate over
and reattach to the unit.
Multi-Pak Instruction Manual Page 10
Step 4:
Line up the screw holes
and fasten the four screws.