Advertisement
ASSEMBLY INSTRUCTIONS
CYC4560 CYCLONE KIT
CYCLONE KIT ASSEMBLY - INSTALLING BRACKETS
SECURE MPB'S TO BOTH ENDS OF DOOR STUDS USING TEK SCREW AS SHOWN.
USE A 10MM MASONARY BIT TO DRILL HOLE FOR THE LOWER MPB. USE A DYNABOLT TO ANCHOR THE
LOWER MPB TO THE SLAB. THESE MPB'S ALSO ACT AS ANCHOR BOLTS.
SECURE MPB'S TO BOTH ENDS OF ROOF CHANNELS USING TEK SCREW AS SHOWN.
THE SHED ROOF LIP MAY NEED TO BE REMOVED IN ORDER TO FIX BRACKET TO SIDE WALL FROM THE
OUTSIDE.
WALL BRACKET MOUNTED
WALL BRACKET MOUNTED TO
TO SIDEWALL
GABLE WALL
ABSCO INDUSTRIES
ASSEMBLY INSTRUCTION - MODEL: CYC4560 CYCLONE KIT 31/05/13
PAGE 21
Advertisement
