Advertisement
CYCLONE KIT ASSEMBLY - INSTALLING DOOR STUDS
DOOR STUDS ARE SINGLE CHANNELS WITH A REBATE THAT SLIDES OVER THE FRONT WALL CHANNEL.
SLIDE THE DOOR STUD OVER THE EXISTING FRONT WALL CHANNEL. ENSURE DOOR STUD IS PROPERLY
PLACE TWO TEK SCREWS TO SECURE DOOR STUD TO FRONT WALL CHANNEL AS SHOWN.
TEK SCREW DOOR STUD INTO POSITION FROM OUTSIDE OF SHED EVERY 296mm. REPEAT THE ABOVE
ABSCO INDUSTRIES
ASSEMBLY INSTRUCTIONS
CYC4560 CYCLONE KIT
ALIGNED AS SHOWN BELOW.
PROCESS FOR OPPOSING DOOR STUD.
ASSEMBLY INSTRUCTION - MODEL: CYC4560 CYCLONE KIT 31/05/13
NOTE
FOR REGENT MODEL SHEDS,
WHERE THE DOORS ARE IN
THE GABLE WALL. AN
EXTENSION SECTION WILL
NEED TO BE SCREWED TO THE
SUPPLIED DOOR STUD AS
SHOWN.
PAGE 18
Advertisement
