Advertisement
CYCLONE KIT ASSEMBLY - INSTALL DOOR RE-INFORCING
STEP 5 - PLACE THE DOOR FRAME AGAINST THE DOOR, ENSURE THAT IT IS CENTERED . YOU MAY NEED
AN EXTRA PERSON FOR THIS TASK. ALTERNATIVELY, REMOVE AND REFIT THE DOOR.
STEP 6 - USE TEK SCREWS THROUGH THE DOOR AT EVERY EVERY CORNER OF THE FRAME.
STEP 7 - CONTINUE PLACING THE TEK SCREWS AT 296MM ALONG EVERY COMPONENT OF THE DOOR
FRAME.
STEP 8 - INSTALL THIRD HINGE A AS SHOW IN PHOTO ABOVE AT A POINT MIDWAY ALONG DOOR
CHANNEL WITH 3mm POP RIVETS
STEP 9 - FOR ALL DOORS, INSTALL EXTRA PADBOLTS D, DOORSTRAPS AND DOOR HASP AT THE
LOCATIONS SHOWN.
FOR DOUBLE DOORS, FIT THE PADBOLTS B AND C TO THE OUTSIDE FACE OF THE DOOR.
STEP 10 - DRILL UPPER AND LOWER DOOR CHANNEL AS SHOWN FOR HOLES B AND C FOR PADBOLT SHAFTS
ABSCO INDUSTRIES
ASSEMBLY INSTRUCTIONS
CYC4560 CYCLONE KIT
B
D
D
C
ASSEMBLY INSTRUCTION - MODEL: CYC4560 CYCLONE KIT 31/05/13
A
B
C
VIEW ABOVE
DOORS FOR
PADBOLT B
SHAFT.
DOUBLE DOORS
ONLY
VIEW BELOW
DOORS FOR
PADBOLT C
SHAFT.
DOUBLE DOORS
ONLY
PAGE 14
Advertisement
