Advertisement
CYCLONE KIT ASSEMBLY - SIDE WALL RE-INFORCING
CONSTRUCTION OF SIDEWALL CHANNELS IS THE SAME AS REAR WALL CHANNEL CONSTRUCTION.
SELECT THE TWO CHANNELS THAT ARE USED FOR THE SIDE WALL, CONNECT THEM TOGETHER INTO A
BOXED CONFIGURATION DO NOT TEK SCREW YET.
PLACE UNSCREWED BOX SECTION AGAINST REAR WALL AND SLIDE CHANNELS OUTWARDS UNTIL
THEY MAKE CONTACT WITH BOTH THE REAR WALL CHANNEL AND THE FRONT WALL CHANNEL. THE
END RESULT SHOULD BE SIMILAR TO BELOW.
B
SIDE WALL CHANNEL A AGAINST REAR WALL
CHANNEL B
ONCE CHANNELS ARE AT CORRECT LENGTH PROCEED TO FIX THEM TOGETHER USING TEK SCREWS AS
ONCE CHANNELS HAVE BEEN SECURELY BOXED TOGETHER USE TEK SCREWS TO FASTEN THE
SECTION TO THE WALL FROM THE OUTSIDE OF THE SHED. THIS TASK IS BEST DONE WITH TWO PEOPLE.
COMPLETED BOXED SECTION MOUNTED TO SIDE WALL AND BRACED AGAINST FRONT WALL BOXED
ABSCO INDUSTRIES
ASSEMBLY INSTRUCTIONS
CYC4560 CYCLONE KIT
A
DESCRIBED ON PAGE 11.
SECTION.
ASSEMBLY INSTRUCTION - MODEL: CYC4560 CYCLONE KIT 31/05/13
A
SIDE WALL CHANNEL A AGAINST FRONT WALL
CHANNEL C
C
PAGE 17
Advertisement
