R&S NGL200 Getting Started page 12

®
R&S NGL200/NGM200
Risk of radio interference
This is a class A product. In a domestic environment, this product may
cause radio interference in which case the user may be required to take
adequate measures.
Risk of instrument damage during operation
An unsuitable operating site or test setup can cause damage to the instru-
ment and the connected devices. Ensure the following operating conditions
before you switch on the instrument:
● The instrument is dry and shows no sign of condensation
● The instrument is positioned as described in
operation",
● The ambient temperature does not exceed the range specified in the
data sheet
● Signal levels at the input connectors are all within the specified ranges
● Signal outputs are correctly connected and not overloaded
EMI impact on measurement results
Electromagnetic interference (EMI) may affect the measurement results.
To suppress generated electromagnetic interference (EMI):
●
Use suitable shielded cables of high quality. For example, use double-
shielded RF and LAN cables.
●
Always terminate open cable ends.
●
Note the EMC classification in the data sheet.
Getting Started 1178.8720.02 ─ 07
on page 17
Putting into operation
Chapter 5.4.1, "Bench
12