[ENG] [IOv2] Installation and Connection
To connect a device:
1.
Unpack a device;
2.
Connect necessary sensors (see the section
3.
Insert wires in necessary connectors and tie them up with a screw;
4.
Plug a standard power supply unit of a device to power connectors, by using an adapter for NetPing IO v2.
Plug a red wire of an adapter into an output 1, and a black wire into an output 3;
[ENG] NetPing IO v2, User guide -[ENG] [IOv2] Installation and Connection
"Plugging
sensors");
[ENG] [IOv2] Installation and Connection
–