Table of Contents
Advertisement
5.
Insert a power supply unit to an electric outlet. A power indicator will light up;
6.
Insert an Ethernet cable into any Ethernet port of a device, plug it to a switch or directly to a network card of
a computer;
7.
LED will light up that is located near the Ethernet port that is connected. When transmitting packages LED
will blink from time to time;
8.
A default IP-address of a device is 192.168.0.100. To perform the initial configuration of a device make sure
that the address of your computer is in the same IP sub network with a device address. For example, the
address of a computer may be: 192.168.0.11 mask: 255.255.255.0.;
[ENG] NetPing IO v2, User guide -[ENG] [IOv2] Installation and Connection
[ENG] [IOv2] Installation and Connection
–
Advertisement
Table of Contents
