Table of Contents
Advertisement
Colored Loop
NetPing IO v2 Terminal
Red
Important! Corresponding IO line must be set to an "input" mode in settings of a device.
A sensor is packaged with an inseparable cable, with connectors on the ends. A cable length can be increased with
the help
of flat cable extenders of
independently with the help of any wire with a minimum cross section of 0,4 mm
flat cable is 100 m.
+U (+12V)
RC-4 sensor, which are sequentially plugged one into another. Or it can be done
[ENG] NetPing IO v2, User guide -[ENG] [IOv2] Plugging Sensors
2
. Maximum allowable length of a
[ENG] [IOv2] Plugging Sensors
–
Advertisement
Table of Contents
