Table of Contents
Advertisement
9.
To perform an initial configuration of parameters of a device using a web interface, make sure that a device
responds to a command ping its IP address;
10.
To configure a device, go to a web interface of a device via the address http://192.168.0.100 using a browser
(it is desirable to use a browser Google Chrome of the latest version). To get authorized, use the next
credentials:
•
Login: visor
•
Password: ping
A further configuration of a device is performed in a web interface of a device.
Important! A description of a device web-interface can be found in a separate document DKSF 253.X IU, where X – is
a firmware number of a device, to which a description is applicable.
[ENG] NetPing IO v2, User guide -[ENG] [IOv2] Installation and Connection
[ENG] [IOv2] Installation and Connection
–
Advertisement
Table of Contents
