System Control Unit - AGFA DX-D 45C User Manual

System Control Unit

The System Control Unit is connected to the DR Detector via wireless network
or via the DR Detector cable.
The System Control Unit is connected to the X-ray generator to synchronize
the exposure, in a configuration with X-ray generator synchronization.
The System Control Unit is connected to the workstation via wired network.
Depending on the configuration, the System Control Unit may not be part of
the system.
1
Power switch
1.
Status indicator
2.
• Blinking green: starting up
• Green: ready
• Blue: communicating to the detector
Figure 7: System Control Unit (SCU) and Mini System Control Unit (Mini
SCU)
Related Links
System Control Unit
Mini System Control Unit
Safety directions for the power supply
DX-D 45C, DX-D 45G | Introduction to the DR Detector | 23
1
2 2
WARNING:
Do not use the System Control Unit within the patient's vicinity.
on page 111
on page 112
on page 69
0292B EN 20190401 1627