Inserting A Battery In The Battery Charger - AGFA DX-D 45C User Manual

92 | DX-D 45C, DX-D 45G | Advanced Operating

Inserting a battery in the battery charger

A battery can be charged in either of both slots of the battery charger, or two
batteries can be charged simultaneously.
To insert a battery, hold it with the arrow marked Insert(T) facing upward
and pointing toward the upper side of the charger.
Figure 15: Orientation marker for inserting a battery in the battery charger
1. Insert a battery in the first slot (top) of the battery charger.
a) Open the cover at the lower side of the charger.
b) Put the battery on top of the charger in the right direction.
c) Push the battery down until it is fixed in the slot.
d) Close the cover at the lower side of the charger.
2. Insert a battery in the first slot (top) of the battery charger.
a) Open the cover at the lower side of the charger.
b) Slide the battery into the battery slot until it clicks.
c) Close the cover at the lower side of the charger.
3. Remove the battery when the status indicator for the slot turns green.
0292B EN 20190401 1627