Table of Contents
Advertisement
J2318
GPIO
GPIO32
GPIO33
GPIO34
GPIO136
GPIO137
GPIO138
GPIO140
GPIO141
GPIO142
GPIO143
GPIO144
GPIO144
Location
J1303
3.16
On-Board Antenna
Genio 350-EVK has three on-board antennas. Users can connect them via coaxial cables. These antennas are
designed for AzueWave M.2 (MT7663) WiFi module, also can be used for MT6631 on-board WiFi chip.
Location
CON3303
CON3304
CON3305
MediaTek Proprietary and
Confidential
Open
Raspberry Pi I/O
RasPi_GPIO32
RasPi_GPIO33
RasPi_GPIO34
RasPi_GPIO136
RasPi_GPIO137
RasPi_GPIO138
RasPi_GPIO140
RasPi_GPIO141
RasPi_GPIO142
RasPi_GPIO143
RasPi_GPIO144
RasPi_GPIO139
Table 3-9 Pin Mux Controlled by Jumper J2318
Short Pin 1 and Pin 2
RasPi_PWM_3V3
Table 3-10 Pin Mux Controlled by Jumpers J1303
2
IRRX_3V3
Figure 3-7 Circuit for Jumpers J1303
Band
2.4GHz / 5GHz
2.4GHz / 5GHz / 1.6GHz
2.4GHz
Table 3-11 On-Board Antennas
© 2022 MediaTek Inc. All rights reserved.
Unauthorized reproduction or disclosure of this document, in whole or in
part, is strictly prohibited.
Genio 350 Evaluation Kit Hardware User Guide
MT6631 / JTAG
CONN_TOP_CLK
CONN_TOP_DATA
CONN_HRST_B
CONN_BT_CLK
CONN_BT_DATA
CONN_WF_CTRL0
CONN_WF_CTRL1
CONN_WF_CTRL2
CONN_WB_PTA
Use Pin 2 and Pin 3
IRRX_3V3
J1303
ME_SIP-3P
1
RasPi_PWM_3V3
1
2
3
3
D_GND
WiFi / BT / GPS
Genio 350 EVK
Unclassified
Short
JTDI
JTDO
JTRST
Note
WiFi
BT
Page 18 of 24
Advertisement
Table of Contents
