Feature Summary - MEDIATEK Genio 350 Hardware User's Manual

1.3

Feature Summary

 MediaTek Genio 350 CPU (MT8365)
 MediaTek PMIC (MT6357)
 3GB LPDDR4 RAM x 1 (Micron MT53E768M32D4DT-053)
 64GB eMMC x 1 (SanDisk/Western Digital SDINBDA4_64G)
 2.0mm DC Jack x 1 (for 12V DC Input)
 Micro SD Card Slot x 1
 Push Button x 4 (Power, Reset, Volume-Up and Volume-Down)
 LED x 4 (Power, Reset, Charging Power Good and Charging Status)

4-Lane DSI x 1
 HDMI x 1
 10/100 Ethernet x 1 (Shared with DIP Signal)
 USB Device Port x 1 (Micro USB Connector)
 USB Host Port x 1 (Type-A USB Connector)
 3.5mm Earphone Jack x 1 (with Microphone Input)
 3.5mm Line Out Audio Jack x 1

Analog Microphone x 1
 Digital Microphone x 2
 UART Port x 2 for Trace Log with USB to UART Bridge IC (Micro USB Connector x 2)
 I2C Capacitive Touch Pad
 4-Data Lane CSI x 2 (SAS SFF-8087 Connector)
 M.2 Slot x 1 (for AzureWave AW-CB451NF WiFi Module)
 40-Pin 2.54mm Pin Header x 1 (for Raspberry Pi like I/O Interface)

3-bit DIP Switch for Boot ID
 2-Pin 2.54mm Jumper (for IrDA Receiver)
MediaTek Proprietary and
Confidential
© 2022 MediaTek Inc. All rights reserved.
Unauthorized reproduction or disclosure of this document, in whole or in
part, is strictly prohibited.
Genio 350 Evaluation Kit Hardware User Guide
Genio 350 EVK
Unclassified
Page 6 of 24