EcoFlow Smart Generator User Manual page 11

Add Generator Engine Oil
Caution
There is no engine oil in the generator when delivered from the
factory. Do not start up the generator until after adding sufficient
engine oil. Do not tilt the generator when adding engine oil, to
prevent damage to the generator due to adding excessive oil.
1. Place the generator on a level plane.
2. Turn the maintenance cover knob to
3. Unscrew the lid and oil dipstick.
4. Inject the specified amount of recommended engine oil, and screw
the lid and oil dipstick closed tightly. Reinstall the maintenance cover
and turn the knob to Closed.
Recommended engine oil: SAE SJ 10W-40
Grade of recommended engine oil: API Grade SJ or higher
Oil capacity: 0.1 gal. / 0.38 L
Rechargeable Battery Connection
The generator cannot be started by the Electric Start switch unless
connected to the internal battery.
Turn the maintenance cover knob to
cover and connect the positive and the negative wires of the battery
respectively.
and take off the maintenance cover.
, take off the maintenance
Removing the
maintenance cover
Refilling the engine oil
Connecting the positive
and negative wires
7