Introduction To The Icons On The Display Screen - EcoFlow Smart Generator User Manual

2.2 Introduction to the Icons on the Display Screen

Remaining Running Time
Low Temperature Alert
High-Temperature Alert
Remaining Power Percentage: If the remaining fuel level is lower than 600 mL/20.3 oz., the indicator
will be at 0% charge and flash to warn you.
Wi-Fi Status: After pressing the IOT button for 3 seconds, the Wi-Fi status will flash on the LCD screen
which indicates that the product is ready for pairing. There're two ways to connect the product with
the App, either directly connect to the product's hotspot or using the Internet. If the App is successfully
connected to the product's hotspot, the icon will keep flashing; if it is successfully connected to the
Internet, the icon will stay on.
Error Code: Please refer to the EcoFlow app for specific information on error codes.
ECO Mode: In ECO mode, the Smart Generator will adjust its rotational speed to match the output
power demand, in order to conserve fuel and reduce noise. This is the default mode. You can modify the
mode settings in the EcoFlow app. For details please refer to 2.4.5.
* See Section 5 for more troubleshooting steps.
Remaining Power Percentage
ECO
Eco Mode
AC Output DC Output
Wi-Fi Status
Total Run Time
Communication Connection
Output Overload Alert
Output Power
Rechargeable
Battery Fault Alert
Error Code
Carbon Monoxide
Alert
5