Table of Contents
Advertisement
C
h
a
p
t
e
r
3
C
h
a
p
t
e
r
3
G
e
t
t
i
n
g
S
G
e
t
t
i
n
g
S
Now that the installation site is properly planned, you are ready to inspect and
install the Protector Evidence Drying Cabinet. This chapter covers how to:
Unpack and move the cabinet.
Install the cabinet.
Connect the electrical supply source.
Tools required for installation of the cabinet include two 1/2" wrenches, a flat-
blade screwdriver, a #2 Phillips screwdriver, scissors, or a box knife.
Note: The 3' cabinet weighs approximately 300 lbs. (136 kg), 4' cabinet 400 lbs.
(182 kg), and 5' cabinet 510 lbs. (232 kg). The shipping pallet allows for lifting
with a mechanical lift truck or floor jack. If you must lift the product manually,
use at least six (6) persons and follow safe-lifting guidelines. All of the cabinets
are very heavy, use a mechanical lift and safe moving practices at all times.
Unpacking the Cabinet
Carefully remove the outer carton and inspect the cabinet for damage that may
have occurred in transit. If the cabinet is damaged, notify the delivery carrier
immediately and retain the entire shipment intact for inspection by the carrier.
Note: United States Interstate Commerce Commission rules require that claims be
filed with the delivery carrier within fifteen (15) days of delivery.
Do not return goods without the prior authorization of Labconco. Unauthorized
returns will not be accepted.
If the cabinet was damaged in transit, you must file a claim directly with the
freight carrier. Labconco Corporation and its dealers are not responsible for
shipping damages.
Do not discard the carton or packing material for the cabinet until all of the
components have been checked, installed and tested.
Product Service 1-800-522-7658
:
:
t
a
r
t
e
d
t
a
r
t
e
d
5
Advertisement
Table of Contents
Need help?
Do you have a question about the Protector 34000 Series and is the answer not in the manual?