Server Connection - Snom M200 SC How To Set Up

Rename Handset
In order to better distinguish the handsets from each other, it is possible to change the name. This name will be shown on the display of
the handset.
To do so, navigate in the web interface of the M215 SC to the menu item "

Server connection

Setting up accounts
Unlike the DECT M series devices, the account information of the
the M SC bases
next section. Of course, the number assignment also depends on the number you have assigned to the account in your PBX.
To configure the Snom M200/215 SC to connect to your PBX, please follow the steps below:
First select the menu item "
, a separate account is created for each phone number. Which handset responds to which number can be read in the
System " at the top of the navigation:
Select " Account 1 " and activate it by checking the box "
Fill out the marked fields.
Account label = This is only the name of the account. It appears as "Line name" under "Line" in the Handset.
Display Name = The Display Name is the text part of the Caller ID that is displayed for outgoing calls with
Account x.
User Identifier = The User ID, also known as Account ID, is a SIP URI field used for SIP registration. Do not
enter the host name (for example, "@
Authentication Name = This should be the same name as the username in the PBX you are using. (If
authentication on the server is enabled, enter the Authentication Name (or Authentication ID) for
authentication with the server)
Authentication Password = Here the same "
Server Address und
your PBX.
System
M SC series
Enable Account
sipservice.com
password
Server Address = Here you enter the "
" and then to " Handset Name
devices is not divided into server and SIP extension. For
".
"). The WebUI automatically adds the default host name.
" as in the PBX you are using goes in here.
Registrar ", either the "
".
IP address/ URL " of