Snom M-SC Series How To Register

How to Register a M15-SC to the M200-SC
Introduction
To use the Snom DECT M-SC series handsets, you need to register them on a DECT base. In the following we will show you how to register the M15-SC
handsets on the M200-SC base.
Please note that even though the process is quite simple, it is necessary to follow the procedure carefully in order to achieve success quickly.
Step by step instructions
1. Place the handset (M15-SC) in its charging cradle for at least a few seconds. It is best to pair fully charged handsets. It is often possible to pair
the handsets without this first step, but since the handsets that are not paired very quickly switch to a power saving mode in which pairing is
impossible, it makes sense to get the handsets out of this mode by placing them in the charging cradle.
2. Take the M15-SC out of the charging cradle.
3. Press or
4. Press to scroll to
5.
on the handset. The Main Menu
User settings and press
appears
or .