Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CORNING LSE 6780-4
Summary of Contents for CORNING LSE 6780-4
- Page 1 Corning Digital Microplate ® ™ and Orbital Shakers Instruction Manual Catalog Numbers: Microplate Shakers Orbital Shakers without Platform 6780-4, 120V 6780-NP, 120V 6781-4, 230V EU 6781-NP, 230V EU 6782-4, 230V UK 6782-NP, 230V UK ...
-
Page 2: Table Of Contents
9.0 Equipment Disposal ................7 CORNING LSE DIGITAL MICROPLATE AND ORBITAL SHAKERS... -
Page 3: Overview
1.0 Overview The Corning® LSE™ Digital Microplate and Orbital Shakers are intended for shaking microplates, tubes, bottles, flasks, dishes, and other laboratory vessels. The shakers are driven by asynchronous motors, which enable silent operation and constant shaking speed independent of the load or power supply fluctuations. -
Page 4: Installation
(Basic, class B), and it is in compliance with IEC 61326-1:2020. The device may experience a restart during overvoltage events (surges) or voltage interruptions in mains power supply. The Corning® LSE™ Digital Microplate and Orbital Shakers are designed to be safe when operated under the following conditions: Indoor use ... -
Page 5: Attaching The Power Cord
4.3 Attaching the Power Cord Fit the main power cord, which is included in the package, into the power receptacle on the shaker. Connect the other end of the cord to a properly grounded wall outlet. To avoid interference from noise, surges, and spikes, a dedicated line is preferred. If no such line is available, avoid lines to which powerful electric motors, refrigerators, and similar devices are connected. -
Page 6: Basic Operation
If you want to set the timer to hold – turn the knob left or right until HLd is displayed. You can reach the HLd function by setting to under 0.30 or above 99.5. Push the encoder knob to switch modes between TIME set mode and RPM set mode. CORNING LSE DIGITAL MICROPLATE AND ORBITAL SHAKERS... - Page 7 Time Speed Start ENCODER Stop Power Speed(RPM) Time(min) PUSH (Time/Speed) RPM signal light is on. By rotating the encoder knob right (+) or left (-) the desired RPM can be selected: 34 = 340 rpm • 120 = 1,200 rpm •...
-
Page 8: Additional Operations
Message Er3 on display Message Er4 on display Should you have a question about the operation of the Corning® LSE™ Digital Microplate and Orbital Shakers or if service is required, please contact Corning Customer Service at 800.492.1110 or 978.442.2200. CORNING LSE DIGITAL MICROPLATE AND ORBITAL SHAKERS... -
Page 9: Maintenance And Cleaning
Claims for transit damage should be filed with the transportation carrier. In the event this product fails within the specified period of time because of a defect in material or workmanship, contact Corning Customer Service at: USA/Canada 1.800.492.1110, outside the U.S. +1.978.442.2200, visit www.corning.com/lifesciences, or contact your local support office. - Page 10 Not for use in humans. These products are not intended to mitigate the presence of microorganisms on surfaces or in the environment, where such organisms can be deleterious to humans or the environment. Corning Life Sciences makes no claims regarding the performance of these products for clinical or diagnostic applications.
Need help?
Do you have a question about the LSE 6780-4 and is the answer not in the manual?
Questions and answers