Moxa Technologies MIINEPORT E1 User Manual page 3

Serial-to-Ethernet Solutions
Recommended PC Board Layout
Pin Assignment
MiiNePort E1 Starter Kit
The MiiNePort E1 Starter Kit includes the MiiNePort E1 module, an
evaluation board, power adaptor, software, and serial and Ethernet
cables to allow quick and easy evaluation of all embedded device
server functions. The evaluation board is equipped with serial,
Ethernet, digital I/O, and power circuits to help you test your
MiiNePort E1 modules and applications.
3
1.27 mm (0.05 in)
1.5 mm
(0.06 in)
12.3 mm
(0.48 in)
16.05 mm (0.63 in)
Pin
1
2
3
4
a. Pin 6 can be configured as Ready/RTS (Request to Send), Ready/DO, or
RS-485 Tx Enabled (default is Ready/RTS)
b. Pin 7 can be configured as DIO, Modem Control Out, RS-485 Tx Enable, or
Reset to Default (default is DIO)
c. Pin 8 can be configured as CTS (Clear to Send), DI, or Modem Control In
(default is CTS)
Cross-over
Ethernet Cable
Document &
Software CD
2.54 mm (0.1 in)
3.58 mm (0.14 in)
Function Pin Function
GND 5 Data In
VCC 6 Ready/RTS
Reset 7 DIO
Data Out 8 CTS
Null Modem Cable
Evaluation Board
w w w. m o x a . c o m
a
b
c
Power Cord
(US or Euro plug)
Power Adaptor
(90 to 240 VAC,
12 VDC)
i n f o @ m o x a . c o m