Electrical Connections; Link Out - Nuvation Energy High-Voltage BMS Installation Manual

Nuvation Energy High-Voltage BMS - Installation Guide
Figure 5. Mechanical Drawing of Cell Interface with DIN Enclosure (NRND)

4.4. Electrical Connections

The Cell Interface module has 4 connectors. Each connector is described in the following sections in
detail.

4.4.1. Link Out

The Link Out connector provides power and communication to the Cell Interface modules above this
Cell Interface. The amount of current supplied by this connector is the sum of current consumed by
all Cell Interface modules above this Cell Interface.
Connect the Cell Interface that is measuring the next series-connected cell above the most positive
cell connected to this connector.
Document ID: NE-IG-001 14 Rev 2.1, 2020-03-13