Optional Din Rail Mounting Kit - Nuvation Energy High-Voltage BMS Installation Manual

Figure 3. Mechanical Drawing of Cell Interface with Bulkhead Enclosure

4.3.1. Optional DIN rail mounting Kit

For applications requiring DIN rail mounting, the Cell Interface may be ordered with the Cell Interface
Mounting Bracket (Bulkhead-to-DIN) kit. This kit is sold separately, and includes a metal plate and
the necessary hardware to securely mount the standard Cell Interface module to EN50022-compliant
DIN rails, as shown in
The Mounting Bracket kit assembly adds an extra 14.2 mm to the overall width of the Cell Interface
module, bringing it from 104.4 mm to 118.6 mm. The kit assembly holds the module approximately 7
mm away from the inside lip of the DIN rail.
The Mounting Bracket offsets the Cell Interface module from the center of the DIN rail approximately
30 mm upwards as shown in
A Cell Interface with the Mounting Bracket weighs approximately 540 g.
Document ID: NE-IG-001
Figure 4.
Figure 4.
Nuvation Energy High-Voltage BMS - Installation Guide
12 Rev 2.1, 2020-03-13