Stack Power - Nuvation Energy High-Voltage BMS Installation Manual

5.3.7. Stack Power

The Stack Power connector is used to provide an overall stack voltage measurement.
Connect the overall battery stack positive terminal to this connector.
Document ID: NE-IG-001
Table 34. Stack Power: Molex MiniFit Jr Connector
Molex 39-01-4031
Manufacturer
Housing
Housing material
Circuits
Crimp terminal
Wire gauge range
Nuvation Energy High-Voltage BMS - Installation Guide
Molex Incorporated
39-01-4031
Nylon UL94V-0
3
39-00-0181
AWG18-24 stranded
35 Rev 2.1, 2020-03-13