Product Installation; Product Dimension; Installation Modes - Dahua MPTZ1100-2030RA User Manual

SN Binding post name
8 ETHTX+
9 ETHRX-
10 ETHTX+
11 NULL
12 NULL
2.2

Product Installation

2.2.1 Product Dimension

Please refer to Figure 2-1 for product dimension information.

2.2.2 Installation Modes

The portable PTZ can be divided into sucker-type PTZ (MPTZ1100-2030RA-NC) and bracket-type PTZ
(MPTZ1100-2030RA-NT) according to different installation modes; it can be optional according to the
users' requirements.
Attention

The PTZ which adopts sucker installation and bracket installation can't share the installation
pedestal, which means that the PTZ which adopts bracket installation can't be installed on the
sucker; equally the PTZ which adopts sucker installation can't be installed on the bracket. The PTZ
models of two installation modes are different; please confirm the installation mode and PTZ model
during purchase.

The bracket-type PTZ is fixed on the vehicle via screws, the sucker-type PTZ is sucked on the
vehicle ceiling via magnet without screws.

The cable ports of two PTZ are the same, and there is no difference for electrical connection, please
pay attention not to make wrong cable connection, you can refer to Figure 2-11 for more details
about cable connection.
Note
RJ45 network port
RJ45 network port
RJ45 network port
-
-
Sheet 2-2
Figure 2-1
11