Ptz Sucker Disassembly Description; Bracket-Type Ptz Installation Description - Dahua MPTZ1100-2030RA User Manual

Step 3
Tie one end of the anti-fall rope to the buckle on the quick installation pedestal, as it is shown in Figure
2-6, and tie the other end to the appropriate location of the vehicle.

2.2.2.2 PTZ Sucker Disassembly Description

Step 1
Pull out the lock catch outward and rotate the speed dome anticlockwise to the location shown in Figure
2-7.
Step 2
Then pull it up and take out the speed dome separately.
Attention
The mobile sucker fails to sustain the weight and impact of the speed dome when the speed is over
60km/h; the speed dome has to be taken back into the vehicle.

2.2.2.3 Bracket-Type PTZ Installation Description

The dimension of PTZ seismic damper is shown in Figure 2-8.
Figure 2-6
Figure 2-7
13