Beko BGMPI 090 User Manual page 8

1 Important safety and environmental instructions
30mA, and disconnection must
be incorporated in the fixed
wiring in accordance with the
wiring rules.
Take note of fuse
specifications
The air conditioner's circuit board
(PCB) is designed with a fuse to
provide overcurrent protection. The
specifications of the fuse are printed
on the circuit board, such as:
T20A/250VAC (for <24000Btu/h
u n i t ) , T 3 0 A / 2 5 0 V A C ( f o r
>24000Btu/h unit)
Note: For the units using R32
C
or R290 refrigerant, only the
blast-proof ceramic fuse can
be used.
Warnings for product
installation
1. Installation must be performed
by an authorized dealer or
specialist. Defective installation
can cause water leakage,
electrical shock, or fire.
2. Installation must be performed
according to the installation
instructions.
8 / 124 EN
3. Contact an authorized service
4. Only use the included
5. Install the unit in a firm location
6. Install
Improper
7. For units that have an auxiliary
Multi Split Type Air Conditioner / User Manual
installation can cause water
leakage, electrical shock, or
fire.
technician for repair or
maintenance of this unit. This
appliance shall be installed
in accordance with national
wiring regulations.
accessories, parts, and
specified parts for installation.
Using non-standard parts can
cause water leakage, electrical
shock, fire, and can cause the
unit to fail.
that can support the unit's
weight. If the chosen location
cannot support the unit's
weight, or the installation is
not done properly, the unit may
drop and cause serious injury
and damage.
drainage
according to the instructions in
this manual. Improper drainage
may cause water damage to
your home and property.
piping