Beko BGMPI 090 User Manual page 28

5 Installation
4. Connect a drain hose extension (not included)
to the drain joint to redirect water from the unit
during heating mode.
If the drain joint doesn't come with a rubber
seal (see Fig� B), do the following:
1. Insert the drain joint into the hole in the base
pan of the unit. The drain joint will click in place.
2. Connect a drain hose extension (not included)
to the drain joint to redirect water from the unit
during heating mode.
Seal
Seal
Seal
Seal
Drain joint
Drain joint
(A)
CAUTION! In cold climates,
make sure that the drain hose is
A
as vertical as possible to ensure
swift water drainage. If water
drains too slowly, it can freeze in
the hose and flood the unit.
Step 3: Anchor outdoor unit
The outdoor unit can be anchored to the ground or
to a wall-mounted bracket with bolt(M10). Prepare
the installation base of the unit according to the
dimensions below.
28 / 124 EN
Base pan hole of
Base pan hole of
outdoor unit
outdoor unit
(B)
The following is a list of different
C
outdoor unit sizes and the
distance between their mounting
feet. Prepare the installation
base of the unit according to the
dimensions below.
Outdoor Unit Types and Specifications
Split Type Outdoor Unit
Split Type Outdoor Unit
W
W
D
Multi Split Type Air Conditioner / User Manual
H
H
A
B