PAC R6000S Operation Manual page 9

POLICY STATEMENT
This is the property of PAC L.P. This manual and all information disclosed herein shall not be used to
manufacture, construct, or fabricate the goods disclosed herein; shall not be exploited or sold; shall not
be copied or otherwise reproduced in whole or in part and shall not be revealed or disclosed to others or
in any manner made public without the express written permission of PAC L.P.
GENERAL INFORMATION
FCC Notice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

Consult the dealer or PAC, L.P. for help.

User changes or modifications not expressly approved by PAC, L.P. could void the user's authority to
operate the equipment.

Use only accessories provided with the R6000S or PAC approved options for continued FCC
compliance.
PAC L.P., All Rights Reserved, 2015
R6000S Operation Manual: Rev. G
Page 7 of 92