Table of Contents
Advertisement
6.7 SERVICE key
T1
T2
T3
T4
Press the SERVICE key to access the following menus:
Setting parameters (for service only)
Time and date setting
Compressors status
Pumps
Circuit maintenance
Display of alarms
Alarm history
PROBES
Defrost (if available)
SET
ALARM
Press T4 key to display all the menu available.
SERVICE
To modify and set the parameters move the cursor using the T1 and T2,press ENTER, to select the required menu, and then SET to select
the desired value.
CIRC
Change the parameters by pressing the T1 and T2, and then press SET again to confirm.
Press the
key to return to the main menu.
EXIT
ENTER EXIT
T8
T7
T6
T5
T1
T2
Electrical heater and pump down valve status
I/O status (Inputs and Outputs)
Screw compressor information (Not configured)
Auxiliary outputs
Domestic hot water (if available)
Free cooling and Solar panel visualization
(if available)
Upload and download parameter map with Hot Key
Control panel
49
ENTER EXIT
T7
T3
T6
T4
T5
Rev. A 11-2020
T8
Advertisement
Table of Contents
