Table of Contents
Advertisement
D
ESCRIPTION OF THE CONTROL PANEL
Display
The instrument display is divided into three zones:
Top left zone: the display shows the inlet water temperature,
Bottom left zone: the display shows the inlet domestic hot water temperature (the digit SAN. Will
appear), Right zone: icons.
Display icons
Icon
Celsius degrees
Bar
Compressor 1
Compressor 2
Key function
M makes it possible to enter the functions menu
SET makes it possible to display or modify the set points. Selects a parameter or confirms a value in
programming mode.
In standard mode allows the display of the
different temperatures 1 click: Bottom line
displays EIN: User inlet water temperature
2 clicks: Bottom line displays EOUT: User outlet
water temperature 3 clicks: Bottom line displays
ET: Ambient temperature
4 clicks: Bottom line displays DEF1: Finned coil temperature
5 clicks: Bottom line displays SAN1: Domestic hot water inlet temperature (return
from the system) 6 clicks: Bottom line displays SAN2: Domestic hot water outlet
temperature (supply to the system)
7 clicks: Bottom line displays CDP1: refrigerant pressure (high pressure in cooling, low pressure in
heating mode) In programming mode allows to scroll through the parameter codes or increases
the values.
In standard mode allows the display of the different temperatures in opposite way of the above arrow...In
programming mode allows to scroll through the parameter codes or increases the values
40 |
P a g e
Meaning
Icon
General Alarm
Electric heaters activated
User water pump
Water flow alarm
Meaning
Advertisement
Table of Contents
