Table of Contents
Advertisement
2. SAFETY
2.1 Warning re potentially hazardous toxic substances
2.1.1 Identification of the Type of Refrigerant Fluid Used: R410A
• Difluoromethane (HFC-32) 50% by weight CAS No.: 000075-10-5
• Pentafluoroethane (HFC-125) 50% by weight CAS No.: 000354-33-6
2.1.2 Identification of the Type of Oil Used.
The lubricant used is polyester oil. Please refer to the information provided on the compressor data plate.
For further information regarding the characteristics of the refrigerant and oil used, refer to the safety data sheets
available from the refrigerant and oil manufacturers.
Main Ecological Information Regarding the Types of refrigerants Fluids used.
ENVIRONMENTAL PROTECTION : Read the ecological information and the following instructions carefully.
2.1.3 Persistence and degradation
The refrigerants used decompose in the lower atmosphere (troposphere) relatively quickly. The decomposed products are highly dispersible
and therefore have a very low concentration. They do not influence the photochemical smog which is not among the VOC volatile organic
compounds (as stipulated in the guidelines to the UNECE). The constituent refrigerants of R410A, do not damage the ozone layer. These
substances are regulated under the Montreal Protocol (revised 1992) and regulations EC no. 2037/200 of 29 June 2000.
2.1.4 Effects of discharges
Discharges into the atmosphere of this product does not cause a long-term contamination.
2.1.5 Exposure controls and personal protection
Wear protective clothing and gloves, protect your eyes and face
2.1.6 Professional exposure limits
R410A
HFC-32
TWA 1000 ppm
HFC-125
TWA 1000 ppm
2.2 Refrigerant handling
Users and maintenance personnel must be F-Gas registered and competent. Failure to follow such instructions can
cause damage to personnel or to the unit.
9
Rev. A 11-2020
Advertisement
Table of Contents
